You’ll need an adapter frame to hold the smaller 2.5″ SSD drive where the 3.5″ HDD sits and you’ll need a special in-line thermal sensor to replace the HDD’s internal sensor OWC – In-line Digital Thermal Sensor for iMac Late 2009 – Mid 2010 Hard Drive Upgrade. Apple considers the memory in the “Late 2009,” “Mid-2010” and “Mid-2011” Aluminum iMac models - all Aluminum iMacs with 21.5-Inch and 27-Inch displays and flat sides - to be a “customer installable part” but the hard drive is not intended to be upgraded by end users. Can a 2009 iMac be upgraded?Īluminum iMac Q&A. To reiterate, Apple does not support individuals upgrading the hard drive or SSD in these models. Can I replace my iMac hard drive with SSD?įor the 27-Inch “2020” iMac models, OWC determined that the SSD in these models, by default, is soldered onboard and not upgradeable. The SSD is 2.5″, if the old iMac drive is 3.5″ the holes to fasten it to the iMac will not line up, you need a bracket. If it is 3.5 inch, the new SSD needs to be screwed into a bracket. Step Two: Remove the Original Hard Drive.Ĭheck if your existing drive is 3.5 inch or 2.5 inch.Unplug everything from your iMac and lay the machine down on a flat surface with the screen pointing up. This page will help you find out what you need. How do you replace a hard drive on a Mac?. Can I replace my iMac hard drive with SSD?.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |